triangulate

Delaunay triangulation or Voronoi partitioning and gridding of Cartesian data

Synopsis

gmt triangulate [ table ] [ -Cslpfile ] [ -Dx|y ] [ -Eempty ] [ -Ggrdfile ] [ -Iincrement ] [ -Jparameters ] [ -M ] [ -N ] [ -Q[n] ] [ -Rregion ] [ -S ] [ -V[level] ] [ -Z ] [ -bbinary ] [ -dnodata ] [ -eregexp ] [ -fflags ] [ -hheaders ] [ -iflags ] [ -qiflags ] [ -rreg ] [ -wflags ] [ -:[i|o] ] [ --PAR=value ]

Note: No space is allowed between the option flag and the associated arguments.

Description

triangulate reads one or more ASCII [or binary] files (or standard input) containing x,y[,z] and performs Delaunay triangulation, i.e., it find how the points should be connected to give the most equilateral triangulation possible. If a map projection (give -R and -J) is chosen then it is applied before the triangulation is calculated. By default, the output is triplets of point id numbers that make up each triangle and is written to standard output. The id numbers refer to the points position (line number, starting at 0 for the first line) in the input file. As an option, you may choose to create a multiple segment file that can be piped through plot to draw the triangulation network. If -G -I are set a grid will be calculated based on the surface defined by the planar triangles. The actual algorithm used in the triangulations is either that of Watson [1982] [Default] or Shewchuk [1996] (if installed; type triangulate - to see which method is selected). This choice is made during the GMT installation. Furthermore, if the Shewchuk algorithm is installed then you can also perform the calculation of Voronoi polygons and optionally grid your data via the natural nearest neighbor algorithm.

Required Arguments

table

One or more ASCII (or binary, see -bi[ncols][type]) data table file(s) holding a number of data columns. If no tables are given then we read from standard input.

Optional Arguments

-Cslpfile

Read a slope grid (in degrees) and compute the propagated uncertainty in the bathymetry using the CURVE algorithm [Zambo et al, 2016]. Requires the -G option to specify the output grid. Note that the slpgrid sets the domain for the output grid so -R, -I, [-rreg] are not required. Cannot be used in conjunction with -D, -F, -M, -N, -Q, -S and -T.

-Dx|y

Take either the x- or y-derivatives of surface represented by the planar facets (only used when -G is set).

-Eempty

Set the value assigned to empty nodes when -G is set [NaN].

-Ggrdfile

Use triangulation to grid the data onto an even grid (specified with -R -I). Append the name of the output grid file. The interpolation is performed in the original coordinates, so if your triangles are close to the poles you are better off projecting all data to a local coordinate system before using triangulate (this is true of all gridding routines) or instead select sphtriangulate. For natural nearest neighbor gridding you must add -Qn.

-Ixinc[+e|n][/yinc[+e|n]]

x_inc [and optionally y_inc] is the grid spacing. Geographical (degrees) coordinates: Optionally, append a increment unit. Choose among m to indicate arc minutes or s to indicate arc seconds. If one of the units e, f, k, M, n or u is appended instead, the increment is assumed to be given in meter, foot, km, Mile, nautical mile or US survey foot, respectively, and will be converted to the equivalent degrees longitude at the middle latitude of the region (the conversion depends on PROJ_ELLIPSOID). If y_inc is given but set to 0 it will be reset equal to x_inc; otherwise it will be converted to degrees latitude. All coordinates: If +e is appended then the corresponding max x (east) or y (north) may be slightly adjusted to fit exactly the given increment [by default the increment may be adjusted slightly to fit the given domain]. Finally, instead of giving an increment you may specify the number of nodes desired by appending +n to the supplied integer argument; the increment is then recalculated from the number of nodes, the registration, and the domain. The resulting increment value depends on whether you have selected a gridline-registered or pixel-registered grid; see GMT File Formats for details. Note: If -Rgrdfile is used then the grid spacing and the registration have already been initialized; use -I and -r to override these values.

-Jparameters

Specify the projection. (See full description) (See cookbook summary) (See projections table).

-M

Output triangulation network as multiple line segments separated by a segment header record.

-N

Used in conjunction with -G to also write the triplets of the ids of all the Delaunay vertices [Default only writes the grid].

-Q[n]

Output the edges of the Voronoi cells instead [Default is Delaunay triangle edges]. Requires -R and is only available if linked with the Shewchuk [1996] library. Note that -Z is ignored on output. Optionally, append n for combining the edges into closed Voronoi polygons.

-Rxmin/xmax/ymin/ymax[+r][+uunit]

Specify the region of interest. (See full description) (See cookbook information).

-S

Output triangles as polygon segments separated by a segment header record. Requires Delaunay triangulation.

-T

Output edges or polygons even if gridding has been selected with the -G option [Default will not output the triangulation or Voronoi polygons is gridding is selected].

-V[level]

Select verbosity level [w]. (See full description) (See cookbook information).

-Z

Controls whether we read (x,y) or (x,y,z) data and if z should be output when -M or -S are used [Read (x,y) only].

-bi[ncols][t] (more …)

Select native binary format for primary input. [Default is 2 input columns].

-bo[ncols][type] (more …)

Select native binary output. [Default is same as input]. Node ids are stored as double triplets.

-d[i|o]nodata (more …)

Replace input columns that equal nodata with NaN and do the reverse on output.

-e[~]“pattern” | -e[~]/regexp/[i] (more …)

Only accept data records that match the given pattern.

-f[i|o]colinfo (more …)

Specify data types of input and/or output columns.

-h[i|o][n][+c][+d][+msegheader][+rremark][+ttitle] (more …)

Skip or produce header record(s).

-icols[+l][+ddivide][+sscale][+ooffset][,…][,t[word]] (more …)

Select input columns and transformations (0 is first column, t is trailing text, append word to read one word only).

-qi[~]rows[+ccol][+a|f|s] (more …)

Select input rows or data range(s) [default is all rows].

-r[g|p] (more …)

Set node registration [gridline]. (Only valid with -G).

-wy|a|w|d|h|m|s|cperiod[/phase][+ccol] (more …)

Convert an input coordinate to a cyclical coordinate.

-:[i|o] (more …)

Swap 1st and 2nd column on input and/or output.

-^ or just -

Print a short message about the syntax of the command, then exit (NOTE: on Windows just use -).

-+ or just +

Print an extensive usage (help) message, including the explanation of any module-specific option (but not the GMT common options), then exit.

-? or no arguments

Print a complete usage (help) message, including the explanation of all options, then exit.

--PAR=value

Temporarily override a GMT default setting; repeatable. See gmt.conf for parameters.

ASCII Format Precision

The ASCII output formats of numerical data are controlled by parameters in your gmt.conf file. Longitude and latitude are formatted according to FORMAT_GEO_OUT, absolute time is under the control of FORMAT_DATE_OUT and FORMAT_CLOCK_OUT, whereas general floating point values are formatted according to FORMAT_FLOAT_OUT. Be aware that the format in effect can lead to loss of precision in ASCII output, which can lead to various problems downstream. If you find the output is not written with enough precision, consider switching to binary output (-bo if available) or specify more decimals using the FORMAT_FLOAT_OUT setting.

Grid Values Precision

Regardless of the precision of the input data, GMT programs that create grid files will internally hold the grids in 4-byte floating point arrays. This is done to conserve memory and furthermore most if not all real data can be stored using 4-byte floating point values. Data with higher precision (i.e., double precision values) will lose that precision once GMT operates on the grid or writes out new grids. To limit loss of precision when processing data you should always consider normalizing the data prior to processing.

Inside/outside Status

To determine if a point is inside, outside, or exactly on the boundary of a polygon we need to balance the complexity (and execution time) of the algorithm with the type of data and shape of the polygons. For any Cartesian data we use a non-zero winding algorithm, which is quite fast. For geographic data we will also use this algorithm as long as (1) the polygons do not include a geographic pole, and (2) the longitude extent of the polygons is less than 360. If this is the situation we also carefully adjust the test point longitude for any 360 degree offsets, if appropriate. Otherwise, we employ a full spherical ray-shooting method to determine a points status.

Examples

Note: Below are some examples of valid syntax for this module. The examples that use remote files (file names starting with @) can be cut and pasted into your terminal for testing. Other commands requiring input files are just dummy examples of the types of uses that are common but cannot be run verbatim as written.

To triangulate the points in the file samples.xyz, store the triangle information in a binary file, and make a grid for the given area and spacing, use

gmt triangulate samples.xyz -bo -R0/30/0/30 -I2 -Gsurf.nc > samples.ijk

To draw the optimal Delaunay triangulation network based on the same file using a 15-cm-wide Mercator map, use

gmt triangulate samples.xyz -M -R-100/-90/30/34 -JM15c | gmt plot -R-100/-90/30/34 -JM15c -W0.5p -B1 -pdf network

To instead plot the Voronoi cell outlines, try

gmt triangulate samples.xyz -M -Q -R-100/-90/30/34 -JM15c | gmt plot -R-100/-90/30/34 -JM15c -W0.5p -B1 -pdf cells

To combine the Voronoi outlines into polygons and paint them according to their ID, try

gmt triangulate samples.xyz -M -Qn -R-100/-90/30/34 -JM15c | \
    gmt plot -R-100/-90/30/34 -JM15c -W0.5p+cf -L -B1 -Ccolors.cpt -L -pdf polygons

To grid the data using the natural nearest neighbor algorithm, try

gmt triangulate samples.xyz -Gnnn.nc -Qn -R-100/-90/30/34 -I0.5

Notes

The uncertainty propagation for bathymetric grids requires both horizontal and vertical uncertainties and these are weighted given the local slope. See the Zambo et al. [2014] and Zhou and Liu [2004] references for more details.

See Also

gmt, greenspline, nearneighbor, contour, sphdistance, sphinterpolate, sphtriangulate, surface

References

Shewchuk, J. R., 1996, Triangle: Engineering a 2D Quality Mesh Generator and Delaunay Triangulator, First Workshop on Applied Computational Geometry (Philadelphia, PA), 124-133, ACM, May 1996.

Watson, D. F., 1982, Acord: Automatic contouring of raw data, Comp. & Geosci., 8, 97-101.

Zambo, S., Elmore, P. A., Bourgeois, B. S., and Perkins, A. L., 2016, Uncertainty estimation for sparse data gridding algorithms, Proceedings of the U.S. Hydro Conference,National Harbor, MD, 16-19 March 2015.

Zhou, Q., and Liu, X., 2004, Error analysis on grid-based slope and aspect algorithms, Photogrammetric Eng. & Remote Sensing, 70 (8), 957-962.

Shewchuk’s Homepage